Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Attach these sturdy steel wheels to the rear of your RV to help prevent tail dragging when backing up. Protect your undercarriage from unnecessary damage.
Features:
Specs:
Note: Not recommended for use on diesel pusher motorhomes due to the extreme rear-end weight of the motorhome.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Ultrafab five inch diameter ultra swivel skid wheel for the class C RVs up to 34 feet in length, and it's for a quantity of two. Now, these unique casters attach to the frame of your RV, and they help prevent tail dragging and digging in while backing up. They are a drop forged caster for superior strength to other casters, and if you notice they use extra strong metal wheels, and extra durable roller bearings, which are long lasting. If you notice they do have a Zerk fitting on the wheel here, and the Zerk fitting right here on the caster. This allows you to grease the bearings on the casters, and the bearings on the wheels. If you notice on the wheels, it also I a quarter inch think urethane layer on the outer edge of each wheel.
This provides and anti-skid barrier, and it insures that the wheel will last even longer by avoiding wear to the metal wheel.These brackets is what you'll weld to your RV, then you'll bolt the skid wheels to the brackets using the included hardware. Application again, is for class C motor homes up to 34 feet in length. The wheel diameter is going to be five inches. So, you can see if we put a ruler on that there's your five inch diameter. Does include everything laid out here on the table.
The two casters, the two steel mounting plates, the installation hardware, which is 12 bolts and nuts, and a nice set of detailed instructions.Now, one note on these. They are not recommended for use on diesel pusher motor homes due to the extreme rear end weight of that motor home. But, that should do it for the review on the Ultrafab five inch diameter ultra swivel skid wheels for class C RVs up to 34 feet in length for a quantity of two.
Average Customer Rating: 4.5 out of 5 stars (18 Customer Reviews)
Attach these sturdy steel wheels to the rear of your RV to help prevent tail dragging when backing up. Protect your undercarriage from unnecessary damage.We are very happy with these skid wheels! The welder that installed them for us said that they were very heavy duty and will work well. We just got back from a week camping trip, and the wheels saved us going out of a steep driveway. They work great! Highly recommend these! We have a 29’ Class C.
Replaced OEM skid plates with this skid wheel. Haven't driven yet, butso far it was an easy install and IMO much better then the OEM installed skid plate.
I purchased these about a year ago to try and get my 34 foot fifth wheel up a fairly steep incline to a pad in my backyard. I was a little apprehensive about purchasing these as I wasn't sure they would work - and I should have trusted my instincts as they didn't. I tried them out once and in the process of backing up the hill one of the weld joints did not hold and the wheel collapsed. I could then see that it wasn't going to be possible to get the RV up onto the pad so I called etrailer to see if I could at least return the wheels(which weren't damaged) and the bolts that came with them. I knew that I wouldn't be able to return the steel plates that were welded to my frame. etrailer told me that I couldn't return any of these since I had used them. So, I am now stuck with skid wheels that I have no use for. So, beware if you purchase these and try them out - you'll be stuck with them!
I bought a set of the 'dolly' wheels for use under my Class C motorhome. Utilizing the on-line instructions, the job appears to be straight forward. Hoping 'dolly' wheels will end the scraping of the rear of the camper on the pavement in front of my inclined driveway. Will be waiting for warmer weather to have mounting pads welded to the frame of the motor home.
Tim H.
12/2/2016
I have been very satisfied with the skid wheels. Better to roll across the surface than to grind against the ground or concrete.
This was one of the best purchases we have made for our RV. No butt bumper dragging in dips. At one campground one guy didn't wait for us to park our RV. He asked where we got our wheels, so we told him. While there we saw many people bottom out in that dip and were confident that it didn't need to be if they had put on skid wheels.
Sylvia D.
7/21/2020
This set of wheels was the best investment we have made so far. After a years use we dont worry about dips or uneveness in the roads or driveways. These wheels take care of all the problems that have come up so far. I HIGHLY recommend these wheels.
I put these on a 33' Crusader fifth wheel to keep from ripping up the driveway every time I pull in/out.
Ray
9/21/2016
After a year still working great!!
We have a sloped driveway and have to use boards to back up the RV, which takes time and a lot of effort. The new skid wheels that we had welded to the rv works great, no more boards. We have had a number of people (with rv’s) ask us at gas stations about them. We are very pleased with this our purchase, wished we had known about these years ago.
Purchased these for our 33 ft travel trailer that bottomed out every time we pulled it down the driveway. We welded them to the frame towards the back and it did the trick.
I bought this item for my motorhome installed them they worked really good for the low slope on my driveway.
Tom D.
12/10/2020
This product has done all it was designed to do it makes it much better to get my motorhome in and out of my driveway
Unhappy with hold down, you suggest to use 21/2” u bolts but don’t supply? Only after I received product . Will not do any more business with you….
Jenny N.
2/21/2022
The 2.5 inch long bolts are only needed if the skid wheels are installed with the alternate bolt on method. The hardware is included for the weld on method that this is meant to be. Ultra Fab makes a bolt on application that includes 2.5 inch long bolts in part # UF48-979017.
I ordered a new set of skid wheels from etrailer and was very very pleased with the service the product and the price. Ellen M was very helpful in making sure I ordered the right wheels for my rv. My order was shipped and arrived in a couple of days.
I would highly recommend this company to any one
Giving bolt hole pattern dimensions would be helpful. Had to modify my mounting plates to attach the new wheels.
Look to be excellent quality.
Excellent product! Easy installation and works very well!
Great product worked as advertised. I put it on a 32 foot rv. No more digging into my asphalt drive
Jason
4/29/2022
After a year of use this product is still great. I was worried it would not hold up but it has. I would recommend
This is a good product. With some minor adjustments I was able to make it work well. I was disappointed that the plates were rusty. It appears that the package had been opened, left out and then returned. Otherwise, good.
Good Web site. Mailed promptly. Good v alue.
Do you have a question about this RV Skid Wheel?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tyler M.
2/25/2021
HI Timothy, Thanks for your feedback! These wheels are not meant to be load bearing. They are specifically for keeping the back of the trailer from bottoming out, saving the bumper.